RMS Balancing and Alignment Services: Routine Machinery Assessment Surveys & Reports Machinery Troubleshooting,
Commisioning / Verification Equipment Sales, Database Set-Up & Support
Balancing & Alignment
Imbalance & Misalignment are the most common faults found in rotating equipment. Improved balancing and alignment is proven to significantly extend the life of your assets. At RMS, we can find out This root-cause, and using PdM techniques bhelp maximize the reliability and availability of your production assets.
The Advantages of precision shaft alignments and rotor balancing help
- Reduce vibration,
- Reduce machine component wear
- Minimize power consumption
- Extend machine life.
Laser alignment
We attach sensor heads to the coupled shafts. and a Laser beams emits from each sensor head across the sensors path. Each shaft position is measured in relation to the other shaft by rotating the two shafts. Shaft misalignment is calculated from the position of each laser beam on its respective target, at a range of angular positions of the laser heads. The position of each laser beam on its target transmits from each sensor head to the CSI 2130 analyzer through direct cable communication until the shafts axis are in full 360 degree alignment
Balancing
Imbalance generates high vibrations at rotating speed (1 order). It occurs when the centerline of a shaft does not correspond with the mass centerline.
RMS uses the CSI 2130 advanced analyser for balancing. It will typically take 3 machine run & stops to solve a balance problem.
Downloads
|
Documents for this section are: |
Contact Details
| enquiries +44(0)1206791917 Fax: +44(0)1206791917 This e-mail address is being protected from spambots. You need JavaScript enabled to view it Office Hours 8:30 to 5pm Mon-Fri |
Quick Email enquiry
CSI 2130 Analyser
The CSI 2130 stands alone as the industry-leading vibration data collector, but its capabilities also include: Advanced Vibration Analysis Cross-Channel Analysis Transient Analysis Dynamic Balancing Laser Shaft Alignment Motor Monitoring
CSI 9420 Wireless VA
CSI 9420 Wireless Vibration Transmitter – Providing Accurate Vibration Monitoring in Hard-To-Reach Locations
CSI 5200 Oil Lab
The CSI 5200 Machinery Health Oil Analyzer tests oil for machine wear, lube system contamination, and chemistry changes of the oil that are indicative of machinery health degradation.